Introduction
FaxCentre 2121/2121L 11/06 iii
Introduction
General Precautions
In order to prevent accidents and to prevent damage to the equipment, please read the precau-
tions listed below carefully and follow them closely before servicing the machine.
Warnings, Cautions and Notes
WARNING
A warning is used whenever an operating or maintenance procedure, practice, condition or state-
ment, if not strictly observed, could result in personal injury.
CAUTION
A caution is used whenever an operation or maintenance procedure, practice, condition or state-
ment, if not strictly observed, could result in damage to the equipment.
Note: A note is used where it is essential to highlight a procedure, practice, condition or
statement.
Safety Precautions for Inspection and Service
• When performing inspection and service procedures, observe the following precautions to
prevent accidents and ensure utmost safety.
*Depending on the model, some of the precautions given in the following do not apply.
• Different markings are used to denote specific meanings as detailed below.
Used to call the CSE’s attention to what is graphically represented inside the marking
(including a warning).
Used to prohibit the CSE from doing what is graphically represented inside the marking.
Used to instruct the CSE to do what is graphically represented inside the marking.
WARNING
• Indicates a potentially hazardous situation which, if not avoided, may result in personal
injury. It may also be used to alert against unsafe practices.
CAUTION
• The following graphic symbols are used to give instructions that need to be observed.
To Next Page
Loading...
