General Procedures and Information
6-20 11/06 FaxCentre 2121/2121L
List of Configurations (SW)
Soft-switch 1: Ringing and automatic printing.
Note: When bit 8 of SOS 1 is set to 1, a protocol report can be printed by pressing the * key.
Also, an internal test pattern can be printed by pressing the # key.
Soft-switch 2: Scanner/Printer engine configuration
Table 1: Ringing and automatic printing
Bit Default Value Naming
11Reserved
20Reserved
3 0 SOS-DURPAUSE: Long/short pause while dialing Values: # 0
(Short 2sec.) or 1 (Long 6sec.)
40Reserved
50Reserved
6 1 SOS-IMPAUTO: Automatic log print Values: 0 (No) or 1 (Yes)
7 0 SOS-IMPT30: Automatic printing of T30 trace after comm error. Val-
ues: # 0 (No)1 (Yes)
8 0 SOS-IMPTRA: Trace printing/PC download enable Values: # 0
(No)1 (Yes)
Table 2: Scanner/Printer engine configuration
Bit Default Value Naming
10Reserved
20Reserved
3 0 Keyboard beep on/off Values: # 0 (Beep on)1 (no beep)
41Reserved
50Reserved
60Reserved
7 0 SOS-COPLOC: Restriction on local copies Values: # 0 (No)1 (Yes)
8 0 SOS-TIMKONIKA: Timed memorizing of photocopier resolution/
contrast/settings Values: # 0 enabled1 disabled
To Next Page
Loading...
