General Procedures and Information
FaxCentre 2121/2121L 11/06 6-29
Soft-switch 24: IEEE Address, SMS
Soft-switch 25: SMS
Table 24: IEEE Address, SMS
Bit Default Value Naming
1 0 SOS-AOP-IEEE: Modification of the IEEE address by the AOP
Values: # 0 (Modification impossible)1 (Modification possible)
2 0 SOS-FAXSWITCH: Activation of fax switch
Values: # 0 (No)1 (Yes)
3 0 SOS-SMS PROTOCOLE: Type of protocol for SMS V23
Values: # 0 (protocol according to the country)1 (Protocol 1)
4 0 SOS-SMSSWITCH: Activation of the SMS SWITCH function
Values: # 0 (Disabled)1 (Enabled)
5 0 SOS-SMSSWITCH2: Activation of SMS SWITCH2 the function
Values: # 0 (Disabled)1 (Enabled)
60Reserved
7 1 SOS-SMSRECV23: Activation of the SMS V23 reception function
Values: # 0 (No SMS V23 reception) 1 (With SMS V23 reception)
8 0 SOS-SMSV23: Activation of the SMS V23 reception function
Values: # 0 (SMS V23 enabled)1 (SMS Internet enabled)
Table 25: SMS
Bit Default Value Naming
1 0 SOS-TIMSMSSWITCH: Waiting time before transmitting a RING
after the first buzzer
preceding the CLIP
# 00 = 2 seconds
01 = 1 x 200 ms
02 = 2 x 200 ms
03 = 3 x 200 ms
04 = 4 x 200 ms
05 = 5 x 200 ms
06 = 6 x 200 ms
......
0F = 15 x 200 ms
20
30
40
5 0 SOS-NORXSMSTORXFAX: Switch to FAX reception after faulty
SMS reception.
# 0: Switches to FAX reception
1: No FAX reception
6 0 SOS-TXADTERMINAL: Transmit the terminal address in the server
number
# 0: No
1: Yes
7 0 SOS-RXADTERMINAL: Receive the terminal address in the server
number
# 0: No
1: Yes
To Next Page
Loading...
