EasyManua.ls Logo

Xerox FaxCentre 2121 - Page 167

Xerox FaxCentre 2121
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Procedures and Information
FaxCentre 2121/2121L 11/06 6-35
pages, the remote readout will be triggered when the corresponding percentage drops below
25%.
The remote readout using the threshold criterion can be triggered only once per consumable.
Once the remote readout has been transmitted, the criterion will no longer be tested until the con-
sumable has been replaced.
The transmissions triggered by the two criteria (thresholds and day) are independent of each oth-
er.i.e: as soon as one of the criteria is met, the transmission is triggered, irrespective of the state
of the other parameters. The transmission is immediate.
It is also possible to force a transmission manually by means of the advanced functions menu (key
sequence MENU, 8, 6, 3).
Initial Consumables
On a new machine, the consumables are activated by reading an initial smart card. The consum-
ables present in the machine at that time are referred to as the initial consumables. In this case,
regardless of the thresholds entered in the advanced functions menu (key sequence MENU, *, 6),
for each consumable the first remote readout will be triggered on the base of a threshold criterion
of 1000 pages. After this, when the consumable has been replaced and after reading the smart
card, the machine switches to the standard remote readout mode as described earlier.
Description of the Transmitted Data
Format of transmitted data in transparent mode.
When a criterion is met, a transmission in transparent mode is generated (the softswitch SOS 10
bit 5 must have been set to 0).
The structure of the transmitted file is of the type TLV (Type - Length - Value).
The transmitted data are defined below, with for each item: its identifier (TLV “type”), its format
(numerical or character string) and its origin (entered by the operator or generated by the soft-
ware).
These parameters, which are also present in the transmission report, will be described further on.
Table 1: Description Of The Transmitted Data
Field Type Char/Num Manual Entry
TVERS_TLR 0x00 char No
TNO_23MIL 0x01 char* Yes
TNO_SERIE 0x02 char* Yes
TNO_CLIENT 0x03 char* Yes
TNO_VERSION 0x04 char* No
TINDICATIF 0x05 char* Yes
TIDENTIFIANT 0x06 char* Yes
TNO_SERVEUR 0x08 char* Yes
TCAUSE_EMIS 0x09 uchar No
TNOMRESP 0x10 char[15] Yes
TSOCIETE 0x11 char[15] Yes

Table of Contents

Other manuals for Xerox FaxCentre 2121

Related product manuals