Xerox FaxCentre 2121

To Next Page

To Previous Page

General Procedures and Information

6-70 11/06 FaxCentre 2121/2121L

Code 0D - Document transmission fault

Ask the correspondent who calls you to retransmit his document.

Code 13 - Memory full

Your fax can no longer receive incoming documents because the memory is full: there are too

many documents that have been received but not yet printed, or there are too many documents

waiting to be transmitted.

Print the received documents, and delete or transmit in immediate mode the documents waiting

to be transmitted.

To print the documents, press M, 3, 8, 1 then OK.

Code 14 - Memory full

Received document memory saturated. Restore the printer to working order.

Print the received documents, press M, 3, 8, 1 then OK.

Code 15 - Mailbox number x unknown

You want to deposit a document in a mailbox of a correspondent, but the mailbox with this number

does not exist with this correspondent.

Code 16 - List number x not retransmitted

You have requested the retransmission of a document by a remote fax, but the latter has not pro-

grammed the requested list of recipients.

Code 17 - Mailbox number x unknown

You want to recover a document from a mailbox of a correspondent but the mailbox with this

number does not exist with this correspondent.

Code 18 - Retransmission impossible

You have requested the retransmission of a document by a fax that does not have a retransmit

function.

Code 19 - Stopped by correspondent

Communication stopped by your correspondent (for example, a fax attempts to recover a docu-

ment from your fax, while there is no document waiting for this correspondent).

Code 1A - Disconnect

Transmission has not started: the phone line is too noisy.

Code 1B - Document transmission fault

In the case of a transmission: restart the transmission.

In the case of a reception: ask your correspondent to retransmit his document.

Xerox FaxCentre 2121 - Page 202