Repairs and Adjustments
4-40 11/06 FaxCentre 2121/2121L
8. Disconnect the shielded ground cable shown in Figure 4.
Figure 4
9. Remove the scanner assembly by lifting it and carefully sliding it to the front of the machine.
CAUTION
Take care not to damage the paper output guides.
Replacement
CAUTION
Take care not to damage the upper transport cover when placing the scanner assembly back into
position. Lift the paper output guides before placing the scanner assembly so that they don’t
interfere with the assembly.
1. The replacement is the reverse of the removal procedure.
2. Perform a scanner calibration (MENU 8 0).
3. Print out a gray scale sample. Press # (make sure SOS1, Bit 8 is set to 1).
To Next Page
Loading...
