Operation
6-13
Copying
The machine is able to print one or more copies of an original document with one or
more pages.
Local copy
Standard copy
¾ Position the document face down (refer to Document positioning on page 6-1).
¾ Press the key twice.
"Enhanced" copy
¾ Position the document face down (refer to Document positioning on page 6-1).
¾ Press the
key.
¾ Enter the desired number of copies and press OK to confirm.
¾ Choose U. FAST, FAST, QUALITY or PHOTO resolution with the
or keys, then
press OK to confirm.
¾ Set the desired zoom value 25% TO 400% with the
or keys and the numerical
keypad, then press OK to confirm.
¾ Choose the copy output type between COPY ASSEMBLED or NOT ASSEMBLED
and press OK to confirm.
¾ Set the required origin values with the
or keys the numerical keypad and
press OK to confirm.
¾ Set the required contrast value with the
or keys and press OK to confirm.
¾ Set the required luminosity (brightness) value with the
or keys and press OK to
confirm.
¾ Choose the type of paper NORMAL, THICK with the
or keys and press OK to
confirm.
¾ Choose the paper tray, AUTOMATIC, UPPER or LOWER with the
or keys and
press OK to confirm.
Specific copy settings
If necessary, perform a scanner recalibration. To do so, refer to Scanner calibration
on page 7-15.
Improve print quality with the following settings:
To Next Page
Loading...
