Operation
6-11
View or modify the waiting queue
M 62 OK - COMMANDS / MODIFY
¾ Select the required document from the queue and press OK to confirm.
¾ Modify the document settings and press the key to confirm.
Deleting a transmission on hold
M 63 OK - COMMANDS / DELETE
¾ Select the required document from the queue and press OK to confirm.
Printing a document in waiting or in deposit
M 64 OK - COMMANDS / PRINT
¾ Select the required document from the queue and press OK to confirm.
Print the waiting queue
M 65 OK - COMMANDS / PRINT LIST
A document called ** COMMAND LIST ** is printed.
Cancelling a transmission in progress
Cancelling a transmission in progress is possible for both a single call number or a
multi-call number.
• For a single call number transmission from memory, the document is erased from
memory.
• For a multi-call number, only the call number in progress is erased from the trans-
mission queue.
To cancel transmission in progress:
¾ Press the
key.
Press the
key a second time to confirm.
¾ Press the key to confirm cancellation in progress.
If the machine is set to print a transmission report (refer to Transmission report on
page 4-4), it will indicate that the communication was cancelled by the user (User
Break).
To Next Page
Loading...
