4-1
4 Setting the machine
The parameters of the machine must be correctly set to obtain quality transmission and
reception.
Set the parameters of the machine by browsing remotely, or through the machine
menus. The parameters are set remotely through the embedded web server, via a PC
registered in the network (depending on model).
Remote setting of parameters
(depending on model)
Embedded web server
The same parameters can be set locally or remotely.
Prerequisites
The following is required to set the machine remotely:
- A Web browser (Internet Explorer version 4 or higher for optimum operation).
- Local network settings of the machine (IP address, sub-network mask, etc.). The
network administrator will provide these settings. When you have this data, refer
to Local Area Network (LAN) settings on page 4-11 in order to complete the
necessary fields.
Access to the Web server
¾ Open a Web browser from a PC registered on the network.
¾ Enter the IP address of the machine in the address field.
¾ Press Enter. to confirm.
¾ The Welcome window is displayed. Select the interface language.
¾ Modify the settings on the screen and then confirm.
To Next Page
Loading...
