Setting the machine
4-13
These two addresses must be filled in for the Scan To Disk function.
M 2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 1
M 2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS 2
¾ Enter the IP address of each server, then press OK to confirm.
SNTP server configuration
The machine can automatically update the date and time when connecting to an Simple
Network Time Protocol (SNTP) server.
Server address
M 2541 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
¾ Enter the name of the SNTP server, then press OK to confirm.
This name can be in the form of an IP address, a Domain Name Server (DNS) address
or a NetBIOS name.
Server port
M 2542 OK - SETUP / NETWORKS / SNTP SERVER / PORT
¾ Enter the server port number, then press OK to confirm.
The port by default is port 123.
Activating the server access
M 2543 OK - SETUP / NETWORKS / SNTP SERVER / STATE
¾ To activate the SNTP server, select WITH using the and navigation keys, then
press OK to confirm.
Time zone
M 2544 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
¾ Select the local time zone using the and navigation keys, then press OK to
confirm.
Activating the automatic summer time management (Menu 212), automatically starts
the TIME ZONE setting.
To Next Page
Loading...
