6-4
Operation
¾ Enter the fax or E-mail address, or use the Directory or key (refer to above
paragraphs).
¾ Press the key and enter the number of the second subscriber or second
subscriber list.
¾ Repeat this last step for all subscribers or subscriber lists (maximum 10 subscribers
or subscriber lists).
¾ Press OK, or to confirm the last addressee depending on the required
operation.
Transmission over the Public Switched Telephone Net-
work (PSTN)
Immediate transmission
¾ Position the document (refer to Document positioning on page 6-1).
¾ Enter the fax number or choose the dialling mode (refer to Dialling on page 6-2)
then press .
The "Line" icon flashes during the call phase. When both faxes are in
communication the "Line" icon remains lit.
¾ At the end of transmission the initial screen is displayed.
Delayed transmission
This function allows you to transmit a document at a later time.
To program a postponed transmission you need to identify the subscriber number,
transmission time, feeder type and number of pages.
To delay the transmission time:
¾ Position the document (refer to Document positioning on page 6-1).
¾ Select M 31 OK
- FAX / TRANSMISSION.
¾ Enter the fax number or choose the dialling mode (refer to Dialling on page 6-2) and
confirm with OK.
¾ Enter the new time and confirm with OK.
¾ Adjust the contrast and confirm by pressing OK.
¾ Select the feed type, FEEDER or MEMORY and confirm with OK (refer to
Document feed type on page 4-4).
¾ Enter the number of pages before transmission and confirm with OK.
¾ Confirm postponed transmission by pressing the
key.
To Next Page
Loading...
