Operation
6-5
The document is stored and will be sent at the new time.
Transmission with auto redial
Monitor the dialling operation during a fax transmission. In this case, the maximum
transmission rate will be 14400 bps.
This function allows the user for example:
• to listen if the subscriber’s fax is engaged and if so, choose the moment when the
line is clear to start the document transmission,
• to monitor the communication progress in case of uncertain numbers, etc.
To monitor the line manually:
¾ Place the document in the fax feeder.
¾ Press
.
¾ If necessary, set the sound level with navigator or keys.
¾ If not already done, enter the fax number (or refer to From the redial key on
page 6-3 to call back the last fax number).
When you hear the remote fax tone, the line is clear and you can start the transmission.
¾ Press to start the document transmission.
If the machine is set to print a transmission report (refer to Main settings on page 4-2),
the reduced copy of the document first page will not be printed and it notifies you that
the communication is manual.
Rerouting
Reroute faxes received to a directory contact by setting and then activating the fax
reroute address.
Activate rerouting
M 3911 OK - FAX / FAX FORWARD. / REROUTING / ACTIVATION
¾ Using the keys
or within the navigator select option 3911 WITH.
¾ Press OK to confirm.
Note: If the function WITHOUT is selected, menus 3912 and 3913 will not be
included in the functions overview, when it is printed out.
To Next Page
Loading...
