6-14
Operation
Scanner settings:
• RESOLUTION to set the photocopy resolution.
• ZOOM settings to reduce or magnify any portion of a document by choosing the
origin and value of the zoom to apply to that portion.
• The assembly parameter to choose between ASSEMBLED or NOT ASSEMBLED
copies.
• The ORIGIN parameter to choose the document orientation.
• CONTRAST to choose the photocopy contrast.
• LUMINOSITY (BRIGHTNESS) is used to make the original document lighter or
darker.
• L/R MARGINS to shift the margins or the original document to the left or to the
right.
Printer settings:
• PAPER is used to tell the machine what type of paper you use by default.
• TRAY is used to tell the machine which paper tray should be used by default.
• L/R MARGINS to shift the margins of the document to the left or to the right.
Note: All the settings performed through this menu will become the machine's
default settings.
To access the settings:
M 84 OK - ADVANCED FUNCTIONS / SCAN. & PRINT
¾ Select the SCANNER or the PRINTER to be set and press OK to confirm.
¾ Use the
or navigator keys to scroll through the following settings:
Scanner settings
Resolution
¾ Set the desired resolution, 1 BLANK, 2 FAST, 3 QUALITY or 4 PHOTO with the
or
keys.
¾ Press OK to confirm the settings.
Zoom
The machine can reduce or magnify a specific part of a document from 25% to 400%.
¾ Enter the desired zoom value with the numerical keypad.
¾ Press OK to confirm the settings.
To Next Page
Loading...
