2-1
2 Installing your machine
Installation requirements
The correct location helps to ensure that your machine provides you with the long
service life for which it is designed. Check to make sure that the location you select has
the following characteristics:
• well ventilated to avoid build up of ammonia or other organic gasses;
• has a minimum distance between the wall and the upper edge of the stacker of at
least 10 inches (25 centimetres) for easier opening of the upper cover;
• close to a grounded power outlet (refer to the safety instructions in the Safety &
Environment chapter);
• is not exposed to direct sunlight;
• is not in the direct airflow of air conditioners, heaters, or ventilators and areas sub-
ject to temperature and humidity extremes;
• has a sturdy, level surface where the machine will not be exposed to strong vibra-
tions;
• away from any objects that might block the heat vents;
• away from curtains or other combustible objects;
To Next Page
Loading...
Need help?
General
