Xerox FaxCentre 2121 - Telephone and LAN Connection; Power Line Connection and Switch-On

Installing your machine
2-13
¾ Make sure the On/Off switch is set to 0 (Off).
Telephone and LAN connection
¾ Plug end of the telephone cable (1) into the telephone socket on the machine (A),
and the other end into the wall telephone socket.
¾ LAN connection (depending on model). Plug one end of the LAN cable (as provided
by your network administrator) into port (C) of your machine and the other end into
the local network port dedicated to your machine.
Power line connection and switch-on
CAUTION: Refer to safety procedures in the Safety & Environment Chapter.
¾ Plug one end of the power cable (2) into the socket (B) on the machine, and the
other end in the wall outlet.
¾ Set the On/Off switch to position 1 (On).
When the machine has warmed up, the date and time will appear.
To set the language and the time on the machine, refer to Setting the machine on
page 4-1.