Maintenance
7-7
¾ Insert chip card (supplied with the toner cartridge) into the card reader ensuring that
the chip is positioned as shown in the illustration below.
¾ The following message is displayed on the scanner control panel screen:
¾ Press OK.
¾ Once the chip card has been read, the display shows:
¾ Remove the card.
CAUTION: If the following message is displayed, check that you have inserted
the chip card the right way up.
Replacing the drum cartridge
To replace the drum cartridge, proceed as shown below.
When the display shows:
CHANGE TONER?
YES = OK - NO = C
TONER OK
REMOVE CARD
CANNOT READ CARD
REMOVE CARD
CHANGE DRUM
<OK> TO CONFIRM
To Next Page
Loading...
