7-14
Maintenance
Cleaning the paper feed roller
¾ 1 - Turn off the printer and unplug the power cable.
¾ 2 - Remove the drum/toner cartridge set from the machine.
¾ 3 - Use a soft cloth to clean the paper feed roller located under the fusing unit.
¾ 4 - Replace the drum/toner cartridge (refer to Replacing cartridges on page 7-2).
¾ 5 - Close the printer cover, connect the power cable and turn on the machine.
CAUTION: The fusing unit located inside the printer above the paper supply
roller may become burning hot during machine operation. To avoid injury - do
not touch.
To Next Page
Loading...
