4-20
Setting the machine
¾ Enter E-MAIL ADR, press OK.
Access to servers parameters
M 923 OK - INTERNET / INIT PROVIDER / SERVERS
¾ Enter SMTP, press OK.
¾ Enter POP3, press OK.
¾ Enter DNS 1 (primary), press OK.
¾ Enter DNS 2 (secondary), press OK.
Access to the authentification SMTP parameters
M 924 OK - INTERNET / INIT PROVIDER / SMTP AUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then
press OK to confirm
In the PARAMETERS menu, select ID. MESS. SERV to keep the same identification
parameters as the messaging service or AUTHENT. SPEC. to define other
identification parameters, then validate by pressing OK. When you select AUTHENT.
SPEC., carry out the two following operations:
¾ Enter the IDENTIFIER then press OK to confirm.
¾ Enter the PASSWORD then press OK to confirm.
Sample Internet settings for the machine (56 kbps modem)
The ISP provides the following information:
Note: Non-functional data given by way of example.
CALL NUMBER: 08 60 00 10 00
CONNECTION IDENTIFIER: sg048944@wn.net
CONNECTION PASSWORD: *****
MESSAGE SERVICE IDENTIFIER: demo jt12
MESSAGE SERVICE PASSWORD: *****
E-MAIL ADDRESS: demo2@gofornet.com
SERVER:
SMTP mail.gofornet.com
POP mail.gofornet.com
DNS 1 103.195.014.001
DNS 2 103.195.014.002
To Next Page
Loading...
