6-8
Operation
Sending a typed message to an E-Mail address
Send a typed message to an E-mail mailbox and add a scanned document as an
attachment.
Access through the menu:
M 95 OK - INTERNET / E-MAIL
Direct access:
¾ Press the key
Then, to send to E-mail address:
¾ Enter the addressee’s E-mail address or choose the dialling mode (refer to Dialling
on page 6-2).
¾ Enter the address to whom you want to send a copy of the document (CC:), and
press OK to confirm.
¾ Enter the object for mail (80 characters max.) and press OK.
¾ Enter the text with the alphabetical keypad (100 lines of 80 characters) and
press OK to confirm.
The keypad has the following editing features:
•for capital letters, use key Shift (key ×),
•to move within the data entry field, use the
or keys,
•to erase a character on the right of the cursor (without moving the cursor), use the
Í or C key,
•to move through the text, press the key and one of the navigator keys,
•to go to the next line, use the key.
Then, either:
¾ Send the typed mail directly. Press OK, the mail is stored in memory and will be sent
at the next Internet connection.
The subscriber will receive an E-mail.
¾ Add an attachment (scanned document):
- Place the document to be attached in the sheet-fed scanner (face down).
- Press the key.
-Select B&W SCAN or COLOR SCAN by means of the
or keys depending on
the document and press OK to confirm.
- If needed, set the contrast with the
or keys and press OK to confirm.
The document is scanned and the mail is stored in memory. They will be sent at the
next Internet connection. The recipient will receive an E-mail with an attached
document.
To Next Page
Loading...
