Xerox Phaser 3320DN User Manual

Software
Xerox Phaser 3320DN/3320DNI
User Guide
13
Software
After you have set up your machine and connected it to your computer, you must install the printer
software. The software is supplied on the CD delivered with your machine, or can be downloaded from
www.xerox.com. The following software is provided:
CD OS Contents
Printer
Software
CD
Windows • Printer Driver: Use the printer driver to take full advantage of your
printer’s features. PCL6, Postscript and XPS drivers are provided.
• Xerox Easy Printer Manager (EPM): Conveniently combines access to
device settings, printing environments and the launch of applications
such as Xerox CentreWare Internet Services into one location.
Note: Login is required to change Printer Settings.
• Wireless Setting Program: When installing the Phaser 3320DNI you can
use the Wireless Setting program that was automatically installed with
the printer driver to configure the wireless settings.
• SetIP program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
Printer
Software
Linux • Printer Driver: Use this driver to take full advantage of your printer’s
features.
Note: Linux software is available on xerox.com only.
Printer
Software
Unix • Printer Driver: Use this driver to take full advantage of your printer’s
features.
Note: Unix software is available on xerox.com only.
Printer
Software
CD
Macintosh • Printer Driver: Use this driver to take full advantage of your printer’s
features.
• SetIP program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
• Smart Panel: This utility enables remote management, displaying toner
levels, printer status and problem alerts.

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English