General Care
Xerox Phaser 3320DN/3320DNI
User Guide
90
4. Remove the new print cartridge from the packaging.
5. Remove the protective sheet from the cartridge and the
plastic handle that is attached to the protective sheet.
Carefully remove all the remaining tape and packaging
from the cartridge.
6. Slowly shake the cartridge five or six times to distribute
the toner evenly inside the cartridge.
Note: If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets
toner into fabric.
CAUTION: Do not touch the green underside of the print
cartridge. Use the handle on the cartridge to avoid
touching this area.
7. Hold the print cartridge by the handle and slowly insert the cartridge into the opening in the
machine.
8. Tabs on the sides of the cartridge and corresponding
grooves within the machine will guide the cartridge into
the correct position until it locks into place.
9. Close the front door. Make sure that the door is securely
closed.
Checking the Supplies Life
1. Press Menu on the control panel.
2. Use the arrow buttons to scroll to Maintenance and press OK.
3. Use the arrow buttons to scroll to Supplies Info. and press OK.