Xerox Phaser 3320DN User Manual

SetIP
Xerox Phaser 3320DN/DNI
User Guide
48
SetIP
The SetIP program is a utility program allowing you to select a network interface and manually
configure the addresses for use with the TCP/IP protocol. This program is on the software CD that
comes with your printer.
For information on using the SetIP program, refer to refer to the Xerox Phaser 3320DN/DNI Utilities
Guide available on Xerox.com.

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English