Xerox Phaser 3320DN User Manual

Media Output Locations
Xerox Phaser 3320DN/3320DNI
User Guide
19
To u se the output tray, make sure that the rear door is closed.
Notes:
• To reduce paper jams, do not open or close the rear door while the printer is printing.
• If paper coming out of the output tray has problems, such as excessive curl, try printing
to the rear door.
• The rear door output can only be used for simplex jobs. Duplex printing with the rear
door open will cause paper jams.
Using the Rear Door
When using the rear door, paper comes out of the machine
face up. Printing from the bypass tray to the rear door
provides a straight paper path and might improve the output
quality when printing on special media. Whenever the rear
door is open, the output is delivered there.
Note: The rear door output can only be used for simplex
jobs. Duplex printing with the rear door open will cause
paper jams.
CAUTION: The fuser area inside the rear door of your
machine becomes very hot when in use. Take care when
you access this area.

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English