Xerox Phaser 3320DN User Manual

Setup Options
Xerox Phaser 3320DN/3320DNI
User Guide
83
Job Timeout When there is no input for a certain period
of time, the machine cancels the current
job. You can set the amount of time the
machine will wait before canceling the job.
• 15 to 300 sec. (16 sec.*)
Config. Page This report provides information about
your machine setup, including the serial
number, IP Address, installed options and
the software version. Select On to enable
this feature.
•On*
•Off
Maintenance Supplies Info.: Allows you to check how
many pages are printed and how much
toner is left in the cartridge.
• Printed Pages displays
Ton er Low Alert: If toner in the cartridge
has run out, a message informing the user
to change the toner cartridge appears.
You can set the option for this message to
appear or not.
•On*
•Off
Ton er Save Activating this mode extends the life of
your toner cartridge and reduces your cost
per page beyond what one would
experience in the normal mode, but it
reduces print quality.
•On
•Off *
Earth Smart Enables you to save print resources and
enables eco-friendly printing. The Onforce
setting requires a password to turn Earth
Smart off.
Default Mode:
Choose Off, On or Onforce.
Onforce Sets the Earth Smart mode On
with a password. If a user wants to turn
the Earth Smart mode On or Off, the user
needs to enter a password.
•Off*
•On
•Onforce
Change Template: Selects the Earth
Smart template set from the CentreWare
Internet Services.
•Default*
•Custom
Clear Setting Restores the machine’s factory default
settings.
•Yes / No
Option Description
Settings
* denotes factory default

Xerox Phaser 3320DN Specifications

General

Brand	Xerox
Model	Phaser 3320DN
Category	Printer
Language	English