Xerox Phaser 6110 Service Documentation

A print job is
extremely
slow.
Half the
page is
blank.
The job may be very complex.
Condition Possible cause Suggested solutions
Reduce the complexity of the page or try
adjusting the print quality settings.
If you are using Windows 9x/Me, the
Spool Setting may be set incorrectly.
From the Start menu, choose Settings and then
Printers. Right-click the Phaser 6110 MFP
Series machine icon, choose Properties, click
the Details tab, and then choose the Spool
Settings button.
Select the desired spool setting.
The paper size and the paper size
settings do not match.
Ensure that the paper size in the printer driver
settings matches the paper in the tray.
Or, ensure that the paper size in the printer dri-
ver settings matches the paper selection in the
software application settings you use.
The page orientation setting may be
incorrect.
Change the page orientation in your applica-
tion. See the printer driver help screen.
The
machine
prints, but
the text is
wrong,
garbled, or
incomplete.
The wrong printer driver was
selected.
Check the application's printer selection menu
to ensure that your machine is selected.
The software application is
malfunctioning.
Try printing a job from another application.
The operating system is
malfunctioning.
Exit Windows and reboot the computer. Turn
the machine off and then back on again.
The file may have blank pages. Check the file to ensure that it does not contain
blank pages.
Some parts, such as the controller or
the board, may be defective.
Contact a service representative.
The printer cable is loose or
defective.
Disconnect the printer cable and reconnect. Try
a print job that you have already printed
successfully. If possible, attach the cable and
the machine to another computer and try a
print job that you know works. Finally, try a new
printer cable.
Pagesprint,
but are
blank.
The toner cartridge is defective or out
of toner.
Redistribute the toner, if necessary.
If necessary, replace the toner cartridge.
The
illustrations
print
incorrectly in
Adobe
Illustrator.
The setting in the software application
is wrong.
Select Download as Bit Image in the TrueType
Options window of the graphic properties and
print the document again.

Xerox Phaser 6110 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	14 s
Time to first page (color, normal)	26 s
Print speed (black, normal quality, A4/US Letter)	17 ppm
Print speed (color, normal quality, A4/US Letter)	4 ppm
Internal memory	32 MB
Maximum internal memory	- MB
Sound power level (standby)	26 dB
Sound pressure level (printing)	47 dB
Total input capacity	150 sheets
Total output capacity	100 sheets
Maximum duty cycle	24200 pages per month
Maximum print size	216 x 356 mm
Media weight (tray 1)	60 - 163 g/sm2
Paper tray media types	Card stock, Envelopes, Plain paper, Transparencies
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Network ready	No
Power requirements	110 - 220 V, 50/60 Hz
Compatible operating systems	Windows 2000/XP/Vista Mac OS 10.3 - 10.4 Linux: Redhat 7.1 Mandrake 8.0 SuSE 7.1 Caldera Open Linux 3.1 Turbo Linux 7.0 Slackware 8.1
Acoustic power emissions (active, print, copy or scan)	34/56 dB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	17 W
Power consumption (printing)	300 W
Display	-
Certification	FCC, CE, CB
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	390 x 344 x 265 mm