Xerox Phaser 6110 Service Documentation

Printing problems
The
machine
does not
print.
The
machine
does not
print.
(continued)
The machine is not receiving power.
Condition Possible cause Suggested solutions
Check the power cord connections. Check the
power switch and the power source.
The machine is not selected as the
default printer.
Select Phaser 6110 MFP Series as your
default printer in your Windows.
The connection cable between the
computer and the machine is not
connected properly.
Disconnect the printer cable and reconnect it.
The connection cable between the
computer and the machine is
defective.
If possible, attach the cable to another computer
that is working properly and print a job. You
can also try using a different printer cable.
The port setting is incorrect. Check the Windows printer setting to make sure
that the print job is sent to the correct port. If the
computer has more than one port, make sure
that the machine is attached to the correct one.
The machine may be configured
incorrectly.
Check the printer properties to ensure that all of
the print settings are correct.
The printer driver may be incorrectly
installed.
The machine is malfunctioning.
Repair the printer software.
See the Software Section.
Check the display message on the control panel
to see if the machine is indicating a system
error.
The
machine
selects print
materials
from the
wrong paper
source.
The paper source selection in the
printer properties may be incorrect.
For many software applications, the paper
source selection is found under the Paper tab
within the printer properties. Select the correct
paper source.
See the printer driver help screen.
Check the machine for the following:
The front cover is not closed. Close the cover.
Paper is jammed. Clear the paper jam.
No paper is loaded. Load paper.
The toner cartridge is not installed. Install the toner cartridge.
If a system error occurs, contact your service representative.

Xerox Phaser 6110 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	14 s
Time to first page (color, normal)	26 s
Print speed (black, normal quality, A4/US Letter)	17 ppm
Print speed (color, normal quality, A4/US Letter)	4 ppm
Internal memory	32 MB
Maximum internal memory	- MB
Sound power level (standby)	26 dB
Sound pressure level (printing)	47 dB
Total input capacity	150 sheets
Total output capacity	100 sheets
Maximum duty cycle	24200 pages per month
Maximum print size	216 x 356 mm
Media weight (tray 1)	60 - 163 g/sm2
Paper tray media types	Card stock, Envelopes, Plain paper, Transparencies
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Network ready	No
Power requirements	110 - 220 V, 50/60 Hz
Compatible operating systems	Windows 2000/XP/Vista Mac OS 10.3 - 10.4 Linux: Redhat 7.1 Mandrake 8.0 SuSE 7.1 Caldera Open Linux 3.1 Turbo Linux 7.0 Slackware 8.1
Acoustic power emissions (active, print, copy or scan)	34/56 dB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	17 W
Power consumption (printing)	300 W
Display	-
Certification	FCC, CE, CB
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	390 x 344 x 265 mm