EasyManuals Logo
Home>Xerox>Printer>Phaser 6110

Xerox Phaser 6110 Service Documentation

Xerox Phaser 6110
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #224 background imageLoading...
Page #224 background image
Supported operating systems
The following table shows the network environments supported by the machine:
TCP/IP: Transmission Control Protocol/Internet Protocol
IPP: Internet Printing Protocol
SNMP: Simple Network Management Protocol
DHCP: Dynamic Host Configuration Protocol
BOOTP: Bootstrap Protocol
Configuring TCP/IP
Your machine can be set up with a variety of TCP/IP network information, such as an IP address, a subnet
mask, a gateway, and DNS addresses.
There are several ways in which your machine can be assigned a TCP/IP address, depending on your net-
work.
Static addressing: A TCP/IP address is assigned manually by the system administrator.
Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address is assigned automatically by the
server.
Note : Before configuring TCP/IP, you need to set the network protocol to TCP/IP.
Static addressing
To enter a TCP/IP address from your machine's control panel, take the following steps:
1. Press Menu until Network appears on the bottom line of the display and press OK.
2. Press OK when TCP/IP appears.
3. Press the Scroll buttons until Static appears and press OK.
4. Press OK when IP Address appears.
5. Enter a byte between 0 and 255 using the number keypad and press the Scroll buttons to move between
bytes.
Repeat this to complete the address from the 1st byte to the 4th byte.
6. When you have finished, press OK.
7. Repeat steps 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
8. Press the Scroll buttons until Primary DNS appears and press OK.

Table of Contents

Other manuals for Xerox Phaser 6110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6110 and is the answer not in the manual?

Xerox Phaser 6110 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)14 s
Time to first page (color, normal)26 s
Print speed (black, normal quality, A4/US Letter)17 ppm
Print speed (color, normal quality, A4/US Letter)4 ppm
Internal memory32 MB
Maximum internal memory- MB
Sound power level (standby)26 dB
Sound pressure level (printing)47 dB
Total input capacity150 sheets
Total output capacity100 sheets
Maximum duty cycle24200 pages per month
Maximum print size216 x 356 mm
Media weight (tray 1)60 - 163 g/sm2
Paper tray media typesCard stock, Envelopes, Plain paper, Transparencies
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5
Maximum ISO A-series paper sizeA4
Network readyNo
Power requirements110 - 220 V, 50/60 Hz
Compatible operating systemsWindows 2000/XP/Vista Mac OS 10.3 - 10.4 Linux: Redhat 7.1 Mandrake 8.0 SuSE 7.1 Caldera Open Linux 3.1 Turbo Linux 7.0 Slackware 8.1
Acoustic power emissions (active, print, copy or scan)34/56 dB
Sustainability certificatesENERGY STAR
Power consumption (standby)17 W
Power consumption (printing)300 W
Display-
CertificationFCC, CE, CB
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)390 x 344 x 265 mm

Related product manuals