Restoring the network configuration
You can return the network configuration to its default settings.
1. Press Menu until Network appears on the bottom line of the display and press OK.
2. Press the Scroll buttons until Clear Setting appears and press OK.
3. Press OK when Yes appears to restore the network configuration.
4. Power the machine off and back on.
Printing a network configuration page
The Network Configuration page shows how the network interface card on your machine is configured.
1. Press Menu until Network appears on the bottom line of the display and press OK.
2. Press the Scroll buttons until Network Info appears and press OK.
3. Press OK when Yes appears.
The Network Configuration page prints out.
To Next Page
Loading...
