EasyManuals Logo
Home>Xerox>Printer>Phaser 6120

Xerox Phaser 6120 User Manual

Xerox Phaser 6120
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
Solving Other Problems120
The web-based
utility cannot be
accessed.
The CentreWare IS
Administrator’s
password is incorrect.
The CentreWare IS Administrator
password has a 6-character minimum
and a 16-character maximum.
For
details of the CentreWare IS
administrator password, see the
Phaser 6120 Reference Guide on the
Software and Documentation
CD-ROM.
Media is wrinkled. The media is moist
from humidity or
having water spilled
on
it.
Remove the moist media and replace it
with new, dry media.
The media feed roller
or fuser unit is
defective.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thickness,
type, etc.) is being
used.
Use Xerox-approved media. See
“Media Specifications” on page 45.
Envelopes are being
printed with both green
fuser separator levers
in the plain paper
position.
Before printing envelopes, place both
green fuser separator levers in the
envelope position.
The date and time
is not correctly
maintained on the
printer.
The backup battery
has reached the end of
its service life.
Replace the backup battery.
For
details, see the Phaser 6120
Reference Guide on the Software and
Documentation CD-ROM.
Symptom Cause Solution

Table of Contents

Other manuals for Xerox Phaser 6120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6120 and is the answer not in the manual?

Xerox Phaser 6120 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Time to first page (black, normal)13 s
Time to first page (color, normal)22 s
Print speed (black, normal quality, A4/US Letter)20 ppm
Print speed (color, normal quality, A4/US Letter)5 ppm
Internal memory128 MB
Processor model300 MHz, 32 bit RISC
Maximum print size210 x 297 mm
Maximum ISO A-series paper sizeA4
I/O portsUSB
Power requirements200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking featuresEthernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)10 - 85 %
Total input capacity200 sheets
Maximum input capacity500 sheets
Printer fontsPostScript
Maximum duty cycle35000 pages per month
Number of PostScript fonts139
Power consumption (printing)380 W
Storage temperature (T-T)-20 - 40 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)442 x 395 x 341 mm

Related product manuals