About the Control Panel
29
Entering the Password
In order to print or delete a secured job, the four-digit password specified from
the printer driver must be entered. Follow the procedure described below to
type in the four-digit password specified from the printer driver.
1 Press the Up and Down keys to increase or decrease the first digit of the
password.
2 Press the Right key to move the cursor to the next digit.
3 Press the Up and Down keys to increase or decrease the second digit of
the password.
4 Continue these steps until all four digits of the password are specified.
5 Press the Menu/Select key.
The PRINT/DELETE selection screen appears.
" If an incorrect password is entered, INVALID ENTRY appears and
the screen for entering the password appears again.
To Next Page
Loading...
