Xerox Phaser 6120 User Manual

About the Control Panel28
PROOF/PRINT MENU
" This menu item appears only if an optional hard disk is installed.
With this menu item, print jobs that are saved on the hard disk by using
Walk-Up Features on the Basic tab of the printer driver can be printed
or
deleted.
" All factory default values are shown in bold.
" * If no jobs have been stored on the hard disk, NO SAVED JOBS
appears.
** In order to print or delete a secure job, enter the four-digit password
specified from the printer driver. For details on entering the password,
refer to “Entering the Password” on page 29.
MENU
PROOF/
PRINT
MENU
"User
name"
SECURE
"Job
name"
PRINT PIN
XXXX**
PRINTS
1
DELETE PIN
XXXX**
PROOF
"Job
name"
PRINT PRINTS
1
DELETE
PRINT/
HOLD
"Job
name"
PRINT PRINTS
1
DELETE
SAVED
"Job
name"
PRINT PRINTS
1
DELETE

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm