Xerox Phaser 6120 - Service Menu

About the Control Panel42
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
FORMAT FORMAT
FLASH
Settings
NO/YES
Select whether or not to initialize the flash RAM.
If YES is selected, the flash RAM is initialized.
FORMAT
DISK
Settings
NO/YES
Select whether or not to initialize the hard disk.
If YES is selected, the hard disk is initialized.
RESTORE /
SAVE
RESTORE
FACTORY
Settings
NO/YES
Select whether or not all menu items are reset to their
initial settings.
If YES is selected, all menu items are reset to their
initial settings.
SAVE
CUSTOM
Settings
NO/YES
Select whether or not all changed menu settings are
saved.
If YES is selected, all changes are saved.
RESTORE
CUSTOM
Settings
NO/YES
Select whether or not menu items are reverted to the
previously saved settings.
If YES is selected, the menu items revert to the
previously saved settings.