Xerox Phaser 6120 User Manual

Media Storage74
Media Storage
How do I store media?
 Keep media on a flat, level surface in its original wrapper until it is time
to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause jams.
 If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
 Avoid moisture, excessive humidity, direct sunlight, excessive heat
(above
35° C [95° F]), and dust.
 Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm