Xerox Phaser 6120 - QUALITY MENU

About the Control Panel34
QUALITY MENU
With this menu, settings for the print quality can be specified.
" All factory default values are shown in bold.
TONER
REMOVAL
BLACK
Settings
YES/NO
When YES is selected, the carousel rotates to the
black toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 79.
CYAN
Settings
YES/NO
When YES is selected, the carousel rotates to the
cyan toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 79.
MAGENTA
Settings
YES/NO
When YES is selected, the carousel rotates to the
magenta toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 79.
YELLOW
Settings
YES/NO
When YES is selected, the carousel rotates to the
yellow toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 79.
REMOVE
ALL
Settings
YES/NO
When YES is selected, the carousel rotates to each
toner cartridge, so that all of them can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 79.
TONER OUT
ACTION
Settings
STOP/CONTINUE
When set to CONTINUE, printing continues even if the toner
cartridge is empty.
When set to STOP, printing stops when the toner cartridge is empty.