Xerox Phaser 6120 User Manual

About the Control Panel
33
" ** These menu items appear only if the optional Tray 2 is installed.
TRAY
SWITCHING*
*
Settings
YES/NO
If YES is selected and the specified paper tray runs
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If NO is selected and the specified paper tray runs out
of paper, printing stops.
DUPLEX
Settings
OFF/SHORTEDGE/LONGEDGE
If OFF is selected, duplex printing is not possible.
If LONGEDGE is selected, the pages will be printed on both sides of
the paper for long-edge binding.
If SHORTEDGE is selected, the pages will be printed on both sides of
the paper for short-edge binding.
ORIENTAT
ION
Settings
PORTRAIT/LANDSCAPE
Specify the orientation of the media.
JAM
RECOVERY
Settings
ON/OFF
Select whether or not the page is printed again after recovering from a
paper misfeed.
If ON is selected, the page that was misfed is printed again.
If OFF is selected, printing continues with the next page without
printing the misfed page.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm