Xerox Phaser 6120 - Page 39

About the Control Panel32
TRAY 2** MEDIA
SIZE
Settings
LETTER/A4
Select the setting for the size of paper
loaded into Tray 2.
" The default setting for 110 volt
printers is
LETTER. The default
setting for all 220 volt printers is
A4.
MEDIA
TYPE
Settings
PLAIN PAPER/
LETTERHEAD
Select the setting for the type of paper
loaded into Tray 2.
CUSTOM
SIZE
WIDTH
(xx)
Settings
92-216 mm
(3.63-8.50 in.)
Specify the width of the custom-sized
paper loaded into Tray 1.
" On the 110 volt printers, the
settings appear in inches and the
menu item appears as
WIDTH(IN). On the 220 volt
printers, the settings appear in
millimeters and the menu item
appears as
WIDTH(MM).
LENGTH
(xx)
Settings
148-356 mm
(5.83-14.01 in.)
Specify the length of the custom-sized
paper loaded into Tray 1.
" On the 110 volt printers, the
settings appear in inches and the
menu item appears as
LENGTH(IN). On the 220 volt
printers, the settings appear in
millimeters and the menu item
appears as
LENGTH(MM).
AUTO
CONTINUE
Settings
OFF/ON
Select whether or not printing continues if the size or
type of paper in the selected paper tray is different
from the size or type of paper for the print job.