Xerox Phaser 6120 - Basic Tab; Layout Tab; Cover Page Setting Tab

Selecting Printing Options
21
Basic Tab
The Basic Tab allows you to
 Specify the orientation of the media
 Specify the size of the original document
 Select the output media size
 Zoom (expand/reduce) documents
 Specify the paper source
 Specify the type of media
 Specify the number of copies
 Turn on/off job collation*
 Save a print job on the printer and print it later (Walk-Up Features)*
 Save a confidential job on the printer and protect it with a password*
 Print a single copy for proofing*
 Send a notification by email when printing is finished
 Specify user information such as email addresses and passwords
*To use this feature, the printer must have a hard drive installed and
enabled.
Layout Tab
The Layout Tab allows you to
 Print several pages of a document on the same page (Pages/Sheet
printing)
 Specify booklet printing
 Rotate the print image 180 degrees
 Specify duplex printing
 Specify whether or not blank pages are printed (PCL printer driver only)
 Adjust the binding margin (PCL printer driver only)
 Adjust the printing position (PCL printer driver only)
Cover Page Setting Tab
The Cover Page Tab allows you to
 Print front and back cover pages and separator pages
 Specify the paper tray that contains the paper for the front and back cover
pages and separator pages