Xerox Phaser 6120 - Page 47

About the Control Panel40
PCL LINE
TERMINA
TION
Settings
CR=CR LF=CRLF/
CR=CR LF=LF/
CR=CRLF LF=LF/
CR=CRLF LF=CRLF
Select the definitions of the CR/LF codes
in the PCL language.
FONT PITCH
SIZE
Settings
44-1000-9999
Specify the bitmap font size in
the PCL language.
FONT
NUMBER
Settings
0-32767
Specify the font used with the
PCL language.
The font numbers that appear
correspond to the PCL font
list. For details on printing the
font list, refer to
“PRINTABLE
PAGES MENU” on page 30.
POINT
SIZE
Settings
400-1200-
99975
Specify the outline font size in
the PCL language.
SYMBOL
SET
Specify the symbol set used
with the PCL language.
The default setting is PC8.
STARTUP
OPTIONS
START
PAGE
Settings
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
If YES is selected, the startup page is printed when
the printer is turned on.
If NO is selected, the startup page is not printed.
SYSSTART
Settings
NO/YES
Select whether or not the PostScript format definitions
file is applied when the printer is turned on.
If YES is selected, the PostScript format definitions file
is applied.
If NO is selected, the PostScript format definitions file
is not applied.