Loading Paper
Phaser® 6280 Printer
56
2. Slide the width guides to the edge of the tray. The width guides should be fully
extended.
Note: When loading paper that is 216 mm (8.5 in.) wide, such as Letter or Legal size
paper, set the tab on the side of the tray to the [8.5] position.
3. Squeeze the green tab on the length guide, and then slide the tray until the arrow lines
up with the appropriate paper size. The guide clicks into place.
6280-013
6280-014
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
