Loading Paper
Phaser® 6280 Printer
57
4. Before loading the print media, flex the sheets back and forth, and then fan them.
Straighten the edges of the stack on a level surface.
5. Place the print media into the tray with the print side face-up.
Note: Do not exceed the maximum fill line in the tray. Overfilling the tray may cause
paper jams.
6. Slide the width guides and length guide until they rest lightly against the edge of the
print media stack.
6280-015
6280-016
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
