Xerox PrimeLink B9100

1. Ensure that the machine has stopped printing before you open the front door of the Interface Decurler Module.
2. Slide the door latch downward and open the bottom-right door.
3. Remove the jammed paper.
Note: If paper is torn, check inside the printer, then remove it.
4. Close the bottom-right door.
Note: If the bottom-right cover is open, a message appears on the user interface, and the printer cannot
operate.
5. Close the front door of the Interface Decurler Module completely. If the door is open, a message appears on
the user interface, and the printer cannot operate.
246
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Troubleshooting