Xerox PrimeLink B9100 User Manual

FAULT MESSAGES ON THE PR FINISHER AND PR BOOKLET MAKER FINISHER
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing,
then a message appears on the printer control panel touch screen. An illustration shows the location of the fault
with a brief explanation of corrective actions for clearing the fault. If a fault occurs in more than one location, the
illustration changes to indicate the multiple locations and the required corrective actions.
The touch screen displays a Faults button that provides information about the fault and detailed instructions for
correcting the fault. The E code on the upper-left part of the Fault message displays which error indicator E1–E9, is
illuminated on the Finisher indicator panel.
Finisher Fault Code Information
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing,
then a message appears on the printer touch screen.
The touch screen displays a Faults button that provides information about the fault and detailed instructions to
correct the fault.
Tip: Finisher faults are identified by the codes that start with the three-digit numbers 012, 013, 024, 041, 112,
and 124.
PR FINISHER PLUS FAULT MESSAGES
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing, and
a message appears on the printer touch screen. An illustration shows the location of the fault with a brief
explanation of corrective actions to clear the fault. If a fault occurs in more than one location, the illustration
changes to indicate the multiple locations and the required corrective actions.
The touch screen displays a Faults button that provides information about the fault and detailed instructions for
correcting the fault. The E code on the upper-left part of the Fault message displays which error indicator is
illuminated on the PR Finisher Plus for Finisher Module E1–E7 or Finishing Transport Areas 1–4.
PR Finisher Plus Fault Code Information
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing, and
a message appears on the printer touch screen.
458
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Production Ready Finishers

Xerox PrimeLink B9100 Specifications

General

Recommended Monthly Print Volume	70, 000 - 700, 000 pages
Duplex Printing	Standard
Type	Multifunction Printer
Print Technology	Laser
Supported Operating Systems	Windows, Mac OS, Linux
Print Resolution	2400 x 2400 dpi
First-page-out time, printing	4.1 seconds
Network Connectivity	Ethernet
Supported Media Sizes	A3, A4, A5, B4, B5
Weight	210 kg
Print Speed (Black)	100 ppm