Xerox VersaLink B7125 User Manual

6. To adjust the length and width guides to fit the paper, pinch the guide locks, then slide the paper guides in until
they touch the paper.
7. Slide the tray back into the printer.
8. To change the settings to match the paper loaded in the tray, at the control panel, select the correct options for
paper size, type, and color.
9. To confirm the settings, touch OOKK.
To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Tray Settings.
LOADING PAPER IN TRAYS 3 AND 4 OF THE TANDEM TRAY MODULE
The control panel displays a warning message when the paper in the tray is in short supply, or when a tray is empty.
To change the paper size in Trays 3 and 4, refer to Configuring Trays 3 and 4 of the Tandem Tray Module.
To load paper in Trays 3 and 4 of the Tandem Tray Module:
172
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Paper and Media

Xerox VersaLink B7125 Specifications

General

Print Technology	Laser
Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Paper Output	250 sheets
Fax	Optional
Functions	Print, Copy, Scan
Scan Type	Color Flatbed Scanner
Automatic Document Feeder	100 sheets
Connectivity	USB, Ethernet
Processor	1.05 GHz
Memory	2 GB
Hard Drive	320 GB
Media Sizes Supported	A4, A5, B5, Letter, Legal
Scan Destinations	Email, USB, Network
Duty Cycle	Up to 107, 000 pages/month