Xerox VersaLink B7125 User Manual

Cleaning the Printer
CLEANING THE EXTERIOR
Clean the exterior of the printer once a month.
• Wipe the paper tray, output tray, control panel, and other parts with a damp, soft cloth.
• After cleaning, wipe with a dry, soft cloth.
• For stubborn stains, apply a small amount of mild detergent to the cloth and gently wipe the stain off.
CCaauuttiioonn:: Do not spray detergent directly on the printer. Liquid detergent could enter the printer through
a gap and cause problems. Never use cleaning agents other than water or mild detergent.
Cleaning the Scanner
To ensure optimum print quality, clean the document glass regularly. Cleaning helps avoid output with streaks,
smears, and other marks that transfer from the glass while scanning documents.
1. Slightly dampen a soft, lint-free cloth with water.
2. Remove any paper or other media from the output tray.
3. Open the document cover.
4. Wipe the surfaces of the document glass and CVT glass until they are clean and dry.
Note: For best results, to remove marks and streaks, use Xerox
®
Glass Cleaner.
5. Wipe the white underside of the document cover until it is clean and dry.
6. Close the document cover.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 193
Maintenance

Xerox VersaLink B7125 Specifications

General

Print Technology	Laser
Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Paper Output	250 sheets
Fax	Optional
Functions	Print, Copy, Scan
Scan Type	Color Flatbed Scanner
Automatic Document Feeder	100 sheets
Connectivity	USB, Ethernet
Processor	1.05 GHz
Memory	2 GB
Hard Drive	320 GB
Media Sizes Supported	A4, A5, B5, Letter, Legal
Scan Destinations	Email, USB, Network
Duty Cycle	Up to 107, 000 pages/month