Xerox VersaLink B7125 User Manual

1. At the printer control panel, press the PPoowweerr//WWaakkee button, then touch PPoowweerr OOffff.
2. Open the front door, then press the power switch off.
CCaauuttiioonn:: Do not unplug the power cord while the printer powers down.
ENTERING AND EXITING SLEEP MODE AND LOW-POWER MODE
After the printer is powered on but is in Sleep Mode or Low-Power Mode:
• The touch screen appears blank and unresponsive.
• The printer exits Low-Power mode or Sleep mode automatically when it receives data from a connected device.
To wake the printer manually, press the PPoowweerr//WWaakkee button.
POWER SAVER
You can set the time the printer spends idle in ready mode before the printer transitions to a lower power level.
There are two levels of power-saver mode.
• LLooww--PPoowweerr TTiimmeeoouutt: The printer shifts from Ready mode to Low-Power mode to reduce standby power
consumption.
• SSlleeeepp TTiimmeeoouutt: The printer shifts from Low-Power mode to Sleep mode for a greater reduction in power
consumption.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 33
Getting Started

Xerox VersaLink B7125 Specifications

General

Brand	Xerox
Model	VersaLink B7125
Category	All in One Printer
Language	English