Approximate Print Yield (Full
Color 8.5x11/A4 Prints)
Reorder QuantityCRUs (Supply Item)
5,000 staples per cartridge1 Staple CartridgeBusiness Ready (BR) Finisher Staple
Cartridge
5,000 staples per cartridge4 pack: 5,000 staple re-
fills each
Business Ready (BR) Finisher with
Booklet Maker Staple Cartridge
5,000 each refill for a total of
15,000
3 refills per cartonStaple Refills for the Business Ready
Finisher and Business Ready Finisher
with Booklet Maker
Checking the Status of Consumables
When a consumable is reaching the time it needs to be replaced, a message is displayed
on the press UI. This indicates when it is time to order and/or install a new consumable
item. With some CRUs, the screen indicates that the press may continue to run print
jobs without immediately replacing the item. Otherwise, when it is time to replace it, a
message appears and the press stops running.
1. Press the Home button on the UI.
2. Press Machine Status and select the Supplies tab.
The Supplies area shows a 1 to 100% indicator bar of the remaining amount of dry
ink/toner. Remaining dry ink/toner is updated in 10% increments.
3. From the Supplies pull-down menu, select Other Consumables to view the status of
other consumables, such as the drum cartridges the Dry Ink/Toner Waste Bottle, and
any applicable optional devices (such as the OHCF feed rolls).
Note
The status of the Fuser and Suction Filter are not shown, but a message displays
when these items require replacing.
Replacing a Dry Ink/Toner Cartridge
Note
The dry ink/toner cartridge can be replaced while a job is printing.
5-7Xerox
®
Versant
®
180 Press
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
