Suggested solutionsProblem
From the PR Finisher or PR
Booklet Maker Finisher,
• Select the option on the press touch screen.
• Check that there are staples in the staple cartridge.
pages in the set are not
stapled or punched.
• Check that the punch scrap container is not full.
Note
For more information on these devices, refer to the Optional
Devices Guide for Xerox
®
Versant
®
180 Press.
Ensure that the drilled paper is loaded correctly in the paper tray
and that the holes are positioned as shown on the tray label.
Drilled paper holes are on
the wrong side.
Xerox
®
Versant
®
180 Press6-6
User Guide
Troubleshooting
To Next Page
Loading...
