Scanning
102 Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Workflow Scanning for FTP or SFTP
Before you begin:
• Ensure that FTP or SFTP services are running on the server or computer being used to store scanned
image files. Note the IP address or host name.
• Create a user account and password with read and write access for the printer to use to access the
repository folder. Note the user name and password.
• Create a folder within the FTP or SFTP root. Note the directory path, user name, and password. This
folder is your file repository.
• Test the connection. Log in to the file repository from a computer with the user name and password.
Create a folder in the directory, then delete it. If you cannot create and delete the folder, check the
user account access rights.
To configure file repository settings for FTP or SFTP:
1. In CentreWare Internet Services, click Properties > Services.
2. Click Workflow Scanning.
3. For File Repository Setup, click the Pencil icon.
4. Click Add New.
5. In the Friendly Name field, type a name for the repository.
6. From the Protocol menu, select FTP or SFTP.
7. Select an address type.
8. Type the appropriately formatted address and port number.
9. In the Document Path field, type the directory path of the folder beginning at the root of FTP or
SFTP services. For example, //directoryname/foldername.
10. If you want the printer to create .XSM subfolders for single page format files, select Sub-folder
(.XSM) for 1 File Per Page, File Format jobs.
11. Under Default Repository Login Credentials, select an option:
− Authenticated User and Domain instructs the printer to use the user name and domain of the
logged-in user when accessing the repository.
− Logged-in User instructs the printer to log in to the repository using the credentials of the
logged-in user.
− Prompt at User Interface instructs the printer to prompt users at the control panel for the
repository credentials.
− System instructs the printer to use specific credentials when accessing the repository. If you
select System, type the credentials in the User Name and Password fields. To update an
existing password, select Select to save new password.
12. Click Save.
To Next Page
Loading...
Need help?
General
