Xerox WorkCentre 5330 User Manual

Maintenance
WorkCentre 5300 Series Multifunction Printer
User Guide
161
Installing Staples
If the printer has the optional Integrated Office Finisher or the optional Office Finisher LX with Booklet
Maker installed, the control panel displays a message when a staple cartridge is empty and needs to
be replaced.
This section includes:
• Staple Replacement for Integrated Office Finisher on page 161
• Main Staple Replacement for Office Finisher LX on page 163
• Booklet Maker Staple Replacement for Office LX Finisher on page 165
Staple Replacement for Integrated Office Finisher
WARNING: Do not perform this procedure when the printer is copying or printing.
1. Open the finisher front cover.
2. Remove the staple cartridge by gripping the orange handle at the front of the cartridge and
pulling it firmly toward you.
wc53xx-044
wc53xx-045

Xerox WorkCentre 5330 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 30 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Hard Drive	80 GB
Copy Speed	Up to 30 cpm
Operating System Compatibility	Windows, Mac, Linux
Connectivity	USB 2.0
Paper Sizes	A4, A5, B5
Scan Destinations	Scan to Email, Network, USB
Fax Speed	33.6 kbps
Duplex Printing	Automatic