Xerox WorkCentre 5330 User Manual

Maintenance
WorkCentre 5300 Series Multifunction Printer
User Guide
165
Booklet Maker Staple Replacement for Office LX Finisher
Note: The booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires
that both staple cartridges contain staples.
WARNING: Do not perform this procedure when the printer is copying or printing.
1. Open the booklet maker side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and gently slide them to the center until they stop.
3. Grip the orange tabs on both sides of the staple cartridge and pull the cartridge out of the stapler.
wc53xx-054
wc53xx-055
wc53xx-056

Xerox WorkCentre 5330 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 30 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Hard Drive	80 GB
Copy Speed	Up to 30 cpm
Operating System Compatibility	Windows, Mac, Linux
Connectivity	USB 2.0
Paper Sizes	A4, A5, B5
Scan Destinations	Scan to Email, Network, USB
Fax Speed	33.6 kbps
Duplex Printing	Automatic